Electric bikes are an ever more common sight on Belgrade's streets — from Voždovac to Zemun, from city bike paths to the climbs towards Avala. We understand why: the battery and motor make cycling accessible for all ages and fitness levels, and with a full battery even a hard effort feels like a light tailwind.
At Bicikl servis Avala we service e-bikes regularly and have experience with hub motors, mid-drive systems and all the leading brands. Here is what is different when servicing an e-bike and what owners should watch for.
What is the same as on a classic bike
An e-bike is still a bike — it has tyres, brakes, gears and a chain that wear exactly like on a classic one. A flat is a flat, motor or not. Squealing brakes have nothing to do with the battery. A worn chain skips just the same.
What is different is that e-bikes are generally heavier (the battery and motor add 5–15 kg), so brakes wear faster and tyres and the drivetrain carry more load. That means shorter service intervals for the same components.
The battery: the biggest cost, but not always a workshop problem
An e-bike's lithium-ion battery has a limited number of charge cycles — typically 500–1,000 cycles before capacity drops to 80%. After that the battery still works, but the range shrinks. That is not a fault a workshop can 'repair' — the battery is simply replaced (or recycled).
What we can do is check the battery's condition with the diagnostic apps — Bosch eBike Flow, Shimano E-Tube, Yamaha PW app — which show the number of cycles, capacity and any errors. If the battery works but shows errors, the problem is often the connector or the BMS (Battery Management System), not the cells themselves.
💡 Tip
Keep the battery between 20% and 80% if you are not sure when you will ride next. Charging from 0% to 100% every time uses up cycles faster. In winter, keep the battery indoors — lithium-ion loses capacity faster in the cold.
Hub motor vs mid-drive: differences in servicing
A hub motor sits in the front or rear axle — fairly simple to service because it is separate from the drivetrain. Changing the rear tyre on a hub-motor bike means disconnecting the electrical connection and handling the motor carefully, which raises the price of the job. That is why disconnecting and reconnecting the e-bike's electrical system is charged separately whenever a job requires working around the motor or the battery; we set the price on site.
A mid-drive motor (Bosch, Shimano EP8, Yamaha, Fazua) sits at the bottom bracket and drives the drivetrain directly. It is more efficient but means the chain, cassette and chainring wear faster than on a hub-drive bike. We recommend replacing the chain every 1,000 km instead of the standard 1,500.
Brakes on an e-bike — a story of their own
Because an e-bike is heavier, the brakes work harder and wear faster. We recommend hydraulic disc brakes on every e-bike — mechanical and V-brake systems are not designed to stop 25–35 kg plus rider plus luggage from city speeds.
If your e-bike has regenerative braking (which charges the battery when slowing down), that is an electronic system we cannot 'service' mechanically, but we can check it with diagnostics and warn you if the values are out of range.
Recommended service intervals for an e-bike
- →Chain lube — every 400–500 km (more often than on a classic bike)
- →Brake pad check — every 800 km or after every season
- →Full service — once a year, without exception (ideally autumn/spring)
- →Battery diagnostics — once a year with the full service
- →Connector and cable check — once a year (corrosion is a common problem after winter)