← Blog
21 May 2025·8 min read

Tubeless tyres: switch or not? An honest guide

Tubeless is becoming standard on modern bikes, but it is not for everyone. We explain the pros, the cons and who really benefits from switching.

Five years ago tubeless was rare on mountain bikes and almost non-existent on city and touring bikes. Today every serious mountain bike comes with it from the factory, and more and more gravel and road bikes do too. Customers ask us more often: 'Is it worth it?'

The short answer: for some kinds of riding — absolutely. For others — it may not be worth the extra hassle. Let us go through all of it.

How tubeless works

A classic tyre has an inner tube that holds the air. A tubeless system has no tube — the tyre itself holds the air, sealed against the rim. For that to work the rim must be tubeless-ready (with a special bead profile), the tyre must be tubeless-ready, the rim must be sealed with rim tape, and the system is filled with sealant that closes small holes.

Sealant is a milky liquid that spreads inside the tyre and seals any puncture up to about 5 mm within seconds. That means a nail can go into your tyre while you ride — and you do not even notice, keep riding, and the tyre stays inflated.

Advantages of tubeless

  • →Resistance to small punctures — nails, thorns and small glass seal by themselves
  • →Lower pressure without the risk of snake-bite flats — better grip on gravel and wet surfaces
  • →Less rotating mass (no inner tube) — livelier response when pedalling
  • →A more comfortable ride at lower pressure, especially on gravel and MTB terrain

Drawbacks and challenges of tubeless

Tubeless is not without downsides. Fitting takes more skill and tools than a classic tyre — the tyre has to seat on the rim in one go, which often needs a compressor or a special pump with a tank. It is not something everyone can do out on the trail without equipment.

Sealant dries over time and has to be topped up every 3–6 months, depending on the temperature. If you skip sealant maintenance, the inside of the tyre turns into a sticky mass and the sealant stops working. That is a cost and a chore a classic inner tube does not have.

💡 Tip

Always carry a tubeless plug kit and a spare inner tube. For a puncture too big for the sealant (a rock that cuts the tyre), the quickest fix on the trail is to fit the inner tube as a fallback.

Who should switch to tubeless?

Tubeless pays off most for mountain bikers who ride gravel and forest trails — that is where the puncture risk is highest and lower pressure gives real grip. Gravel riders who mix tarmac and gravel on long rides (and do not want to deal with a flat halfway) are the next ideal group.

For a city rider on tarmac only, with standard city tyres, the complexity of tubeless rarely brings proportional benefits. A classic inner tube with an anti-puncture tyre is the simpler and cheaper option for riding around Belgrade.

Tubeless conversion in the workshop

If your rims are tubeless-ready and your tyres support it, a conversion is fairly affordable. At Bicikl servis Avala we do tubeless conversions (rim tape, valve and sealant); we set the price on site, after checking the rim and tyre.

First we check whether your rims and tyres are really compatible — not every 'tubeless-ready' tyre works well on every rim, and it is better to know that before you spend money. Bring the bike in for free diagnostics and ask.

Maintenance tips

Leave your email — we send useful tips.

No spam. Only practical bike service and maintenance advice.

NEED A SERVICE?

Diagnostics are always free. Bring your bike to Pinosava or we collect it anywhere in Belgrade — we check what it needs together and you decide what we do.

Bike repair in Belgrade — prices and bike pickup →